The LAB31 Universal Tripod is a practical, adjustable, and highly versatile support for smartphones, tablets, cameras, and more. Whether you’re filming, photographing, streaming, or vlogging, this tripod adapts to your creative needs. It includes a 2-in-1 smartphone/tablet holder, a carry bag, and all the features needed for easy use and stability.
Key Features
- Device compatibility:
- Smartphones (width: 5.5 to 8 cm)
- Tablets (width: 11.5 to 17.3 cm)
- Digital cameras
- LED lights
- Ring lights
- Height range: Adjustable from 60 cm to 170 cm
- Folded size: 62 cm
- Rotation: 360° smooth panning
- Load capacity: up to 1 kg
- Mount: Universal 1/4-inch screw
- Includes:
- 2-in-1 smartphone/tablet holder
- Carrying bag with handle
- Note: Devices shown on packaging are not included
Highlighted Functions
- Carry bag with handle – For easy transport
- Weight hook – Hang extra weight (up to 1 kg) for added stability
- Built-in spirit level – Ensures even setup on irregular surfaces
- Quick flip locks – Fast, secure adjustment of the leg segments
- 360° head rotation – For panning, landscape and portrait shots
- Adjustable device holder – Fits a range of smartphones and tablets
1. Safety Guidelines
- Do not exceed the weight limit (1 kg).
- Keep away from moisture and heat sources.
- Do not allow children to use it unsupervised.
- Always check that all parts are properly tightened before use.
- Use the weight hook at your own discretion—test before adding any load.
2. Setup Instructions
Unfolding and Extending the Tripod
- Place the tripod on a stable surface.
- Pull out each leg from the center and spread them evenly.
- Unlock the telescopic legs by turning the flip locks.
- Extend each section, then flip the locks back to secure.
- Use the integrated bubble level to verify the tripod is straight.
Adjusting the Center Column
- Turn the crank handle to raise or lower the center column.
- Lock it into place using the tightening knob.
3. Mounting Your Device
- Attach the 2-in-1 holder to the tripod’s 1/4″ screw mount.
- Insert your phone or tablet securely into the adjustable clamp.
- Make sure it is balanced and centered for best stability.
4. Head Controls
Panning
- Loosen the side knob to rotate the head horizontally (360°).
- Tighten the knob to lock the position.
Tilting
- Use the rear knob to tilt the device up or down.
- Re-tighten once the angle is right.
Angle Adjustments
- Loosen the vertical adjustment knob to change between portrait and landscape mode.
- Tighten to lock the position.
5. Maintenance Tips
- Clean with a damp cloth and mild soap if needed.
- Dry thoroughly before storing.
- Do not use solvents, alcohol, or abrasive cleaners.
- Store in the included carry bag in a dry place.
Manufacturer’s Note
The LAB31 Universal Tripod Stand can be used for several multimedia devices. It can be adjusted by using the knobs. Extendable from 60 to 170 cm. Use the spirit level to level the 3 legs on uneven surfaces. You may suspend an object of max. 1 kg from the hook for additional stability. Use at your own risk – test before use.
Product Information
- Brand: LAB31
- Model: 2203901
- Barcode (EAN): 8715342043470
- Made in: PRC (China)
- Package: FSC-certified recycled paper (PAP 21/22)
- Return policy: 8 days with receipt
- Seller: Action Nederland BV, Perenmarkt 15, 1681 PG Zwaagdijk-Oost
- Receipt-confirmed purchase: May 4, 2025, Delfzijl store, €12.97
Conclusion
The LAB31 Universal Tripod is more than just a basic stand. It’s a reliable tool for home users, travelers, and content creators alike. With its wide compatibility, adjustable height, 360° movement, and thoughtful accessories, it’s ready to support your creativity—anywhere, anytime.
My Diary - Leonardo Cardillo 